TFE/P (AFLAS®)

  Below lists our most common grades. Material Datasheets are available via the office.

  
SSOL-FEPM-85

• is a Black coloured TFE/P with a hardness of 85 Shore A. It can be used for static and dynamic seals, wipers, O-rings, flange seals, rotary seals, rubber energizers (preload elements). Ideally suited for applications where high temp. and/or chemical resistance is required typically found in the oil and gas industry.

SSOL-FEPM-90

• is a Black coloured TFE/P with a hardness of 90 Shore A. This grade carries very similar attributes as SSOL-FEPM-85 but is slightly more extrusion resistant. This material is more commonly used for anti-extrusion and back-up rings.